Hot water heating

HOT WATER HEATING

KOMBI KN-AT BIOMASS BOILER

Boilers are manufactured in accordance with the European standard EN305-5. Kombi kn-at boiler consists of a kombi kn boiler and a mechanism for automatic feeding and burning of biomass at.

It is possible to use the following types of fuel:

Automatic dosing

pellets – maize – briquettes
pits (olive – peach – cherry – plum)
shells (almond – hazelnut – chestnut)

Dosing through upper door:

firewood – coal

With a suitable burner:

fuel oil or gas

The storage tank is equipped with a mixing arm to ensure uninterrupted and smooth adding of fuel to the boiler.

Control of fuel dosing is provided by the automatic timer which controls the engine of the feeding auger (start – stop timer).

It boasts a dual system of fire protection with automatic fire extinguishing through the temperature sensor.

Combustion is controlled by a high pressure fan. The quantity of added air can also be set mechanically.

Opening for installation of fuel oil or gas burner.

TYPE	kn-at	15/30	30/50	50/80	80/120	110/165	160/220	200/260	250/320	300/380	350/440
Thermal power – firewood	Kw	15	30	50	80	110	160	200	260	300	350
Thermal power – pellets	Kw	28	42	64	106	158	192	234	296	348	392
Voltage	V	220	220	220	220	220	380	380	380	380	380
Dosing auger engine power	Kw	0,37	0,37	0,37	0,74	0,74	0,74	0,74	0,74	1,10	1,10
Height	mm	1.450	1.570	1.590	1.705	1.760	1.840	2.630	2.650	2.700	2.750
Width	mm	1.430	1.440	1.510	1.580	1.630	1.720	1.720	1.720	2.100	2.180
Length	mm	820	820	910	1.080	1.245	1.420	1.460	1.460	1.720	1.720
Weight	Kg	366	406	478	606	706	980	1.350	1.392	1.760	1.855
Fuel tank volume	m³	0,4	0,40	0,40	0,40	0,52	0,52	0,66	0,66	0,80	0,80

KOMBI KN-PA BIOMASS BOILERS

Firewood and pellet boilers are manufactured in accordance with the European standard En303-5.

Izdelani v skladu z Evropskimi standardi EN303-5

The company Thermodynamiki S.A. manufactures a wide variety of pellet boilers which at the same time allow burning of firewood. The biomass boiler consists of a stove, a dosing system with two augers and a fuel tank.

The firebox is made of stainless steel with high thermal resistance. Fuel dosing is regulated by an automatic control unit with the following characteristics:

Automatic ignition
5 different programs for flame regulation
Automatic regulation of fan rpm
Choosing fuel quality
Remote controlling via thermostat
Possible setting of a weekly programme

The boiler is equipped with a dual system for fire protection, two augers and a fire valve.

The boiler is comprised of:

electronic control panel
two temperature and pressure valves
a fire valve

With a suitable burner it is possible to use:

fuel oil or gas

The storage tank is equipped with a mixing arm to ensure uninterrupted and smooth adding of fuel to the boiler.

Control of fuel dosing is provided by the automatic timer which controls the engine of the feeding auger (start – stop timer).

It boasts a dual system of fire protection with automatic fire extinguishing through the temperature sensor.

Combustion is controlled by a high pressure fan. The quantity of added air can also be set mechanically.

Opening for installation of fuel oil or gas burner.

TYPE	kn-pa	30	45	56
Thermal output – firewood	Kw	15	30	48
Thermal output – pellets	Kw	28	42	56
Voltage	V	220	220	220
Dosing auger engine power	Kw	0,37	0,37	0,37
Height	mm	1.570	1.570	1.590
Width	mm	1.200	1.280	1.440
Length	mm	820	820	910
Weight	Kg	225	295	360

KOMBI COMBINED STOVE WITH HOT AIR BLOWER AND HOT WATER HEATING type SPM-KN

A combination of manual and automatic burning of a variety of biomass (wood chips, briquettes, sawdust, pellets, olive and fruit pits…)

The stove operates as a thermogenic stove and hot-water boiler. It can be used to heat hot air and hot water at the same time.